Castables

BM Enterprises is a leading castable refractory material authorized dealer, stockiest, manufacturer and supplier in Faridabad, Gurgaon, Noida, Ghaziabad, Delhi NCR, Karnal, Panipat, Ambala, Bhiwadi, Jaipur, Bawal, Neemrana, Mandi Govindgarh, Jalandhar and Ludhiana, and India, offering a complete range of high-quality refractory and insulating castables manufactured for superior performance in industrial applications. Our products are engineered to withstand extreme heat, abrasion, and harsh operating environments, ensuring maximum efficiency and durability.

Our product range includes Insulating Castables, High Alumina Refractory Cement, High Alumina Castable Refractory, A Coil Coat Castables, High Alumina Cement, Maxcreate Super, Maxlyte 11 LI, Maxmon 80 SI, Maxlyte, Maxheat-K, Maxheat-K (N), Maxheat-A, Maxheat-A (N), Maxheat-C, Maxheat-C (N), Maxlyte-7, Maxlyte-7 (N), Maxcrete-Super, Maxcrete -Super (N), Maxcrete -Normal, Maxcrete -Normal LT, Whytheat-K, Whytheat-A, Whytheat-C, Firecrete-Super, Firecrete-Normal, Maxmon 80, LC-80, Maxmon-70, LC-70, Calcem-70, Calcem-50, Calundum-50, Calundum-70 and Gunning Castables, each produced to deliver excellent thermal insulation, high strength, and resistance to thermal shocks. These solutions are ideal for furnaces, kilns, boiler refractory, foundry and other high-temperature equipment across steel, cement, and power industries.

With a focus on quality and reliability, BM Enterprises ensures easy material delivery, long service life, and energy efficiency for all our refractory products. Choose us for dependable products backed by expert support, best rates and on-time delivery across Delhi NCR and beyond.

Refractory Castable Manufacturer & Exporter in India

Industrial furnaces and kilns are subject to high heat, so it's critical to have good lining material that resists heat, pressure, and chemical corrosion. That's where refractory castables are used. Refractory castables are cement-like, high-heat-resistant materials that are applied to line furnaces, kilns, incinerators, and reactors. Castables differ from conventional fire bricks in that they arrive at the site in dry powder form and are mixed on-site with water before being troweled or poured into position.
BM Enterprises is a reliable manufacturer and supplier of refractory castables in Faridabad, Gurgaon, Noida, Ghaziabad, Delhi NRC, that provides a total series of industrial furnace, kiln, and boiler-specific high-performance materials. Our product range consists of refractory monolithic castables, high alumina refractory cement, refractory insulating castables, and refractory dense castables, all designed to provide enhanced strength, thermal resistance, and durability at high temperature and pressure conditions.
We apply high-tech binders to refractory castables and stick to accurate castable refractory recipes to provide consistent quality and function.

Mahakoshal Low Cement Castables

Low Cement Castables are new-generation refractory materials, specifically designed for high-temperature applications. These have low cement content compared to ordinary castables, making them stronger with improved durability under the effect of heat. Because of their dense material composition, these are highly resistant to cracking, abrasion, and sudden changes in temperatures. Low cement castables are widely used in the design of Blast & Reheating Furnaces, Rotary Kilns, Boiler, Steel & Metallurgy, Clinker Zones, Petrochemical & Power Plants, and other industrial equipment where durability and efficiency are of utmost importance. Their easy handling and improved durability make them a valuable option in several industry setups. We supply Mahakoshal brand low refractory castables to all major states and cities in India with precise delivery times. We cover Faridabad, Delhi, Noida, Gurgaon, Ghaziabad, and surrounding areas, as well as other cities such as Bawal, Neemrana, Jaipur, Bhiwadi, Ludhiana, Mandi Gobindgarh, and Jalandhar.

Our Product Range for Refractory Castables Are

MAXHEAT-K / WHYTHEAT-K
Maxheat K is made of high-purity alumina and calcium aluminate cement, combined with special refractory aggregates and additives. Maxheat-K / Whytheat-K is a type of dense, high-alumina refractory castable known for its excellent thermal strength, resistance to abrasion, and superior performance under extreme temperatures. It is used for monolithic linings in high-temperature industrial applications like heat treatment furnaces, kilns, and boilers. Many people refer to "MaxHeat-K" as "Whytheat-K" and these mahakoshal make refractory castables supplied and distributed by BM Enterprises. It offers longer service life, easy installation, and reliability in heavy-duty applications. This composition gives it high strength (90 MPa), excellent thermal stability, and resistance to thermal shocks, making it suitable for high-temperature applications up to 1600°C.
Specifications: Alumina Content – 60%, Bulk Density – 2.7 g/cm³, Max Service Temp – 1600°C.
Features: Fast setting, superior bonding, and abrasion resistance.
Widely used in rolling mills, steel ladles, non-ferrous and copper industries, furnace linings, kilns, and boilers. BM Enterprises is a trusted dealer, authorized distributor, exporter, manufacturer and supplier of Maxheat K or Whytheat- K in Faridabad, Gurgaon, Noida, Ghaziabad, Delhi NCR, Bhiwadi, Jaipur, Bawal Neemrana, Mandi Gobingarh, Jalandhar, Ludhiana, and Punjab and across India.

MAXHEATE-A(N)
Maxheat-A (N) is a high-performance normal-setting high alumina refractory castable designed for superior strength, durability, and thermal resistance in demanding furnace and kiln applications. Manufactured and supplied by BM Enterprises, this product ensures excellent performance in high-temperature environments, making it ideal for industries such as steel, cement, and petrochemicals.
Specifications & Features: Alumina Content: ~78-82%, Maximum Temperature: 1700°C, Bulk Density: 2.4–2.6 g/cc, Cold Crushing Strength: 400–600 kg/cm², Setting Time: Normal (30–60 min), High thermal resistance, Excellent strength and stability & Resistant to slag and chemical attack.
Applications: Rotary kilns & furnaces, Boilers & incinerators, Steel & metallurgical units, Cement plant kiln/preheater areas & Petrochemical & refinery furnaces.

MAXHEAT-K(N)
Maxheat-K(N) is a high-alumina refractory castable of high quality that is intended for heavy-duty use with better high-temperature strength and high-temperature stability. Being highly resistant to mechanical stress, thermal shock, and abrasion, it has a longer service life than normal refractory materials. Being easy to install and repair, this castable can perform consistently even under severe operating conditions.
BM Enterprises is a reliable manufacturer and supplier of Maxheat-K(N) in Faridabad, Gurgaon, Noida, Ghaziabad, Delhi NCR, Bhiwadi, Jaipur, Bawal, Neemrana, Mandi Gobingarh, Jalandhar, Ludhiana, Punjab, and all over India.
Specifications & Features: Alumina Content: ~60%, Temperature: Up to 1600°C, Good thermal stability, High abrasion resistance, Easy installation and repair, Long-lasting durability.
Applications: Maxheat-K(N) is extensively applied in Kiln and furnace linings, Heat treatment furnaces, Steel plants and foundries & Boilers and incinerators.

MAXHEAT-A
Maxheat A aslo known as Whytheat-A is an alumina-based mahakoshal make refractory castable with high strength that is suitable for severe industrial conditions. Maxheat A can be understood as a high-purity, low-iron refractory castable material formulated for use in industrial furnaces, offering excellent thermal stability and resistance to reducing atmospheres. It has excellent mechanical strength and thermal shock resistance to provide durability in high-temperature areas. It is simple to mix and apply, supplying a smooth finish along with excellent bonding. Its high alumina content makes it ideal for application in harsh environments where chemical resistance is critical.
Whytheat A: High-Purity Alumina Dense Castable
Whytheat A is a premium, high-purity dense refractory castable engineered for extreme temperature and aggressive industrial environments.

Core Feature: The material contains a very high percentage of Alumina (Al2O3), generally ~85-90%, which provides superior performance characteristics.

Performance: Exhibits excellent thermal stability with a maximum service temperature as high as 1750 °C. It also offers high mechanical strength and excellent resistance to thermal shock and chemical corrosion by slags and process gases like CO/H₂.

Installation: Hydraulic-bonded material, supplied as a powder/granular mix for easy and quick application by vibration casting to provide a robust monolithic (seamless) lining.

Primary Uses: It is suited for critical hot-face linings in such demanding sectors as steel ladles, blast furnace linings, cement plant preheaters/kilns, petrochemical reactors, and non-ferrous metal furnaces.

It represents the top grade in its family, ensuring long equipment life with reliable operation even under the most severe high-heat processes.
Whytheat-A Available in: Faridabad, Gurgaon, Noida, Ghaziabad, Delhi NCR, and Other major cities like Neemarana, Jaipur, Bhiwadi, and Bawal.
Specifications & Features: Alumina Content: ~90%, Maximum Temperature: 1750°C, Low Shrinkage on Heating, High Mechanical Strength, Good Chemical Resistance.
Applications : Cement rotary kilns, Furnace roofs and sidewalls, Steel and glass industries.

MAXHEAT-C
Maxheat-C is a high-grade refractory castable with high mechanical strength, thermal shock resistance, and resistance to high temperatures. It finds extensive application in kiln linings, boilers, and furnaces used in high-heat treatment. Its high alumina composition ensures safe and reliable performance and long service life in high-duty applications.

MAXHEAT-C (N)
Maxheat-C (N) is a standard setting, high-performance castable with greater thermal resistance and workability. It has a better bonding strength and toughness and can be used for industrial furnaces, steel melting units, incinerators, and foundry linings. Its simple installation and repair ability make it a favorite for heavy-duty use.

Maxlyte-7 (N)
Maxlyte-7 (N) is a normal-setting insulating castable for excellent heat insulation and energy conservation. It minimizes heat loss, enhances furnace efficiency, and exhibits satisfactory strength in operating conditions. It is essentially a lightweight, heat-resistant concrete designed to keep heat inside industrial equipment and prevent energy loss.
Maxlyte 7(N) comes as a dry powder in 25kg or 50kg bags. It must be mixed with clean water (usually around 60–65% by weight) until it reaches a mortar-like consistency. Typical use is in kilns, power plant boilers, incinerators, and heat-treating furnaces.

Maxlyte-11 Insulation Refractory Castables
Maxlyte-11 Insulating Refractory Castables by BM Enterprises are high-performance, lightweight refractory castables for effective thermal insulation in high-temperature applications. Low thermal conductivity, excellent resistance to heat, and dependable strength make Maxlyte 11 an ideal choice for furnaces, kilns, boilers, and lining systems in various industries. As opposed to dense refractory castables, Maxlyte 11 has low heat loss and thus has an extremely important role in the making of an energy-saving industrial area. BM Enterprises supplies genuine Mahakoshal Maxlyte-11 castables that ensure consistent quality, energy efficiency, and a long service life in demanding industrial environments.

Maxcreate-Super (N)
Maxcrete-Super (N) is a normal setting, high-strength refractory castable designed for enhanced durability and thermal shock resistance. It provides excellent performance in furnaces under high temperature, rotary kilns, and foundry practices. It is simple to apply and maintain, resulting in long service life and stable results under harsh industrial conditions.

Maxcrete-Normal
Maxcrete-Normal is a medium-duty all-purpose refractory castable for use in general furnace and boiler linings. It has good mechanical strength, thermal stability, and ease of installation, yet is an economical option for cement, steel, and power industries. Due to its versatility, it is a reliable material for medium-duty applications.

Maxcrete-Normal LT
Maxcrete-Normal LT is an LT-resistant refractory castable formulated for use in moderate heat-exposure applications. Providing good bonding strength, wear resistance, and convenience of application, it finds extensive application in boilers, small furnaces, and incinerators. Its consistent performance provides efficient and durable thermal protection at economical cost.

Firecrete-Super
Firecrete-Super is a super-duty refractory castable with a high alumina composition that provides superior strength, wear resistance, and high-temperature resistance. It can be used up to service temperatures of 1800°C and is widely applied in steel plants, foundries, rotary kilns, and heavy-duty furnace linings. Its strong performance ensures long working life even under harsh conditions.

Firecrete-Normal
Firecrete-Normal is a premium refractory castable for general furnace use. It provides consistent thermal stability, workable ease, and high bonding strength. Formulated for medium-duty service, it is generally used in kilns, boilers, and heat-treatment furnaces to provide cost-effective, long-lasting performance.

Maxmon 80
Maxmon 80 is a high-alumina castable refractory with alumina content of ~80%, possessing superior strength, abrasion resistance, and thermal shock stability. It can be used up to a service temperature of 1800°C and is used extensively in steel plants, rotary kilns, cement plants, and heavy-duty furnaces for ensuring long life under severe conditions.

LC-80 Castables
LC-80 is a high-alumina, low-cement castable that provides high density, high strength, and good thermal conductivity. Its application in steel plants, cement rotary kiln, foundries, and power generation plants is very suitable due to its low porosity and resistance to slag attack. It maintains durability, simple installation, and low downtime.

Maxmon-70 Refractory Castables (Similar to Hicast 70)

Maxmon-70 from BM Enterprises is a premium quality 70% alumina high-temperature refractory castable that possesses superior thermal stability, abrasion resistance, and mechanical strength. It can be used up to 1700°C and finds extensive application in furnace linings, incinerators, boilers, and foundries. It is easy to repair and maintain and offers long-term protection against intense heat. As a "Low Cement" castable, Maxmon 70 requires less water during mixing than conventional types, resulting in a denser structure and higher strength. Maxmon-70 matches other refractory materials such as Hicast 70, Accmon 70, and Criterian 70 with its long-lasting performance, good workability, high densification, and robust nature. Maxmon-70 refractory castable material can be considered to be the best refractory available in the market because of its excellent properties, long life, good workability, and good densification, which makes it very suitable for usage in steel, cement, and power plants.

LC-70 Refractory Castables

LC-70 from BM Enterprises is a premium low cement refractory castable with approximately 70% alumina, possessing high density, high strength, and low porosity. It is very resistant to thermal shock, abrasion, and slag attack and is therefore suitable for use in cement plants, kilns, steel industries, and boilers. Low Cement-70 is designed to perform similarly to other equivalent products, such as Hicast-70, Accmon-70, and Criterian-70, and this ensures that the cost-effective refractory performs efficiently and effectively with easy installation and a longer working life. It is ideally suited to the steel, cement, and power sectors.

Calcem-70
Calcem-70 is a highly specialized refractory castable with 70% alumina content, which is formulated for superior bonding, high refractoriness, and thermal shock resistance. It is applicable to kiln linings, high-temperature furnaces, and incinerators and provides extended service life and low maintenance requirement.

Calcem-50
Calcem-50 is a general-purpose refractory castable with 50% alumina, possessing good thermal and mechanical strength. It finds extensive application in general furnace linings, boiler linings, and medium-duty industrial service, offering a cost-effective balance between durability and performance.

Calundum-50
Calundum-50 is a 50% alumina refractory castable used for moderate to high-temperature applications. It provides good thermal stability, abrasion resistance, and durability and is ideal for boilers, cement works, and foundries. It is easy to install and highly bonded, making it very reliable.

Calundum-70
Calundum-70 is a 70% alumina refractory castable with superior thermal shock, abrasion, and high-temperature resistance. It is intended for use in steel plants, rotary kilns, furnaces, and cement plants and ensures prolonged service under severe industrial conditions.

Gunning Castables
Gunning Castables are particularly designed for pneumatic gunning application, with fast installation, high bonding strength, and high thermal resistance. They are best suited to repairs, furnace linings, boilers, and steel plants, with minimum downtime and longer life of equipment. With high thermal shock and abrasion resistance, they are a favorite choice for maintenance and prompt repairs.

Composition and Key Ingredients

A typical refractory castable is made up of three key components:

Refractory Aggregates: These are high-purity materials like alumina, silica, magnesia, or bauxite, providing structural strength and heat resistance.

Binders: Binders such as calcium aluminate cement or chemical binders hold the mixture together after hardening.

Additives: Additives improve flow, bonding, and mechanical strength, ensuring the castable performs efficiently under varying conditions.

Types of Refractory Castables

Conventional Castables: Contain a higher percentage of cement (around 15%) and are widely used in general-purpose applications.

Low-Cement Castables (LCC): These offer superior mechanical strength, thermal shock resistance, and reduced porosity.

Ultra-Low Cement Castables (ULCC): Ideal for critical zones of furnaces where thermal and chemical stress is maximum.

No Cement Castables (NCC): Used for extreme conditions—these rely on chemical bonding instead of cement, offering exceptional durability.

Why BM Enterprises is the Leading Refractory Castable Supplier in Faridabad

BM Enterprises is recognized as a top refractory castables supplier in Faridabad for its commitment to quality, on-time delivery, and customer satisfaction. With years of industry experience, they supply durable and high-performance refractory materials for various industrial needs.
Their product range includes:

High Alumina Castables

Insulating Castables

Low-Cement Castables

Dense Refractory Castables

As a refractory castable manufacturer in Faridabad, BM Enterprises uses premium raw materials and advanced manufacturing technology to ensure consistency and reliability in every batch. Their products meet international standards and undergo rigorous quality testing for strength, heat resistance, and density.

With a focus on quality and reliability, BM Enterprises ensures easy material delivery, long service life, and energy efficiency for all our refractory products. Choose us for dependable products backed by expert support, best rates and on-time delivery across Delhi NCR and beyond.